Automated Solvent Flushing and Cleaning Module

Automated Solvent Flushing and Cleaning Module

Model: RSP-FC

The proposed FLOSN RSP-FC automates solvent selection, metered flushing and waste routing for compatible extraction lines, sample-transfer circuits and laboratory fluidic components. Three solvent positions and four selectable circuit connections support sequential cleaning recipes with pressure and waste-level monitoring. The module is intended for verified, depressurized host connections; cleanliness and carryover limits require application-specific validation.

Request a Quote+852 4666 1024 / +86 18630849305
Category: Brand:

FLOSN / PRODUCT FEATURES

Product Features

6 FEATURES

Programmed Solvent Selection

Three reservoirs support primary wash, intermediate solvent and final rinse sequences.

Four Selectable Circuits

One metering pump serves four routes sequentially; flow is not divided across all circuits.

Pressure-Limited Flushing

Recipe limits and host permissives prevent a cleaning step from exceeding the qualified circuit limit.

Contained Waste Handling

A closed, safely vented receiver and secondary tray provide level and leak monitoring.

Traceable Cycle Records

Stores selected solvent, delivered volume, time, pressure and alarms for each route.

Validation-Ready Sampling

An optional return sample point supports residue-specific blank or rinse analysis.

FLOSN / TECHNICAL PARAMETERS

Product Features

SELECTED MODEL

CFD-SA500

Model-specific specifications
Chamber volume
520 mL
Operating pressure
0–2,200 psi
Power consumption
1,500 W
Exhaust flow rate
0–2 SLPM

Chamber & operation

Chamber dimensions · I.D. × depth (mm)
114.3 × 50.8 mm
Chamber dimensions · I.D. × depth (in)
4.5 × 2 in
Operating pressure · MPa
0–15.2 MPa
Maximum safe working pressure
2,500 psi (17.2 MPa)
Heating method
PTC electric heating / cartridge electric heating
Overall dimensions · W × D × H
Not specified
SELECTED MODEL

CFD-SA1000

Model-specific specifications
Chamber volume
1,080 mL
Operating pressure
0–2,200 psi
Power consumption
1,500 W
Exhaust flow rate
0–2 SLPM

Chamber & operation

Chamber dimensions · I.D. × depth (mm)
165.1 × 50.8 mm
Chamber dimensions · I.D. × depth (in)
6.5 × 2 in
Operating pressure · MPa
0–15.2 MPa
Maximum safe working pressure
2,500 psi (17.2 MPa)
Heating method
Cartridge heater heating
Overall dimensions · W × D × H
Not specified
SELECTED MODEL

CFD-SA1800

Model-specific specifications
Chamber volume
1,860 mL
Operating pressure
0–2,200 psi
Power consumption
2,000 W
Exhaust flow rate
0–0.5 SLPM

Chamber & operation

Chamber dimensions · I.D. × depth (mm)
215.9 × 50.8 mm
Chamber dimensions · I.D. × depth (in)
8.5 × 2 in
Operating pressure · MPa
0–15.2 MPa
Maximum safe working pressure
2,500 psi (17.2 MPa)
Heating method
Cartridge heater heating
Overall dimensions · W × D × H
Not specified
Shared specifications · all models

Materials & pressure safety

Chamber material
SS316L
Optional materials
Hastelloy C276, Inconel 625, Monel 400, Titanium Grade 2, PTFE lining
Pressure safety system
Electronic pressure monitoring combined with mechanical over-pressure relief protection

Environment & utilities

Operating temperature range
−30 to +60 °C
Operating ambient humidity
20%–70% RH, non-condensing
Power supply
120 / 220 V AC, 50–60 Hz
CO₂ gas requirement
High-purity liquid CO₂ supply; recommended purity >99.9%

Cooling, control & filtration

Cooling system
Integrated closed-loop cooling; the internal chiller loop accelerates cooling and reduces CO₂ consumption
Control system
LCD touchscreen; semi-automated control with programmable timer operation and electronic sensor monitoring
Filtration system
Double T-Filter, Cat. No. 8785; two passes through 0.5 μm filters; >99.5% retention

Samples & chemical compatibility

Compatible sample types
Biological specimens, microscopy samples, hydrogels, aerogels, porous materials, polymers, and other structure-sensitive materials
Compatible solvents
CO₂-miscible solvents commonly used in sample preparation, including ethanol, acetone, methanol, and other laboratory solvents
Chemical compatibility warning
Strongly acidic, strongly alkaline, oxidizing, or highly toxic solvents require prior compatibility evaluation before use
Standard configuration & options

Standard configuration

  • High-pressure viewing window chamber
  • Integrated chamber illumination system
  • Integrated condensation and gas-liquid separation system
  • Non-mechanical CO₂ mixing and exchange system
  • Controlled slow filling and venting system
  • Precision vent flow meter
  • Standard stainless steel CO₂ supply line
  • Anti-static exhaust tubing
  • Replacement O-ring seal kit
  • Installation tool kit
  • User operation manual
  • Factory acceptance test report
  • Warranty and technical support

Optional configurations

  • Interchangeable sample holders
  • Custom sample chamber inserts
  • Magnetic stirring module
  • High-temperature / high-pressure chamber customization
  • Corrosion-resistant alloy chamber upgrade
  • Microscopy sample holder kit

FLOSN / APPLICATIONS

Applications

FLOSN / RESOURCES

Related Documents / Videos